Learn how to install a commercial door closer. With this guide, you will obtain security and ease when entering and exiting your building.
Easy Installation of Commercial Door Closer
With this blog, you will learn the best and most practical steps on how to install commercial doors and safely!
With this easy 3-step guide, you will finish immediately:
- Door inspection
- Template to mark screws
- Drill
Give your building the security and speed of entry and exit it deserves. Professionals indicate that this is not only a good practice but also an investment for your building.
Customers coming in and out on a daily basis will feel a greater desire for satisfaction. As a result, they will want to return to the building more often.
What is A Commercial Door Closer ?
First, It will be good to know about commercial door closers. They are mechanical terminals designed with a hydraulic arm that automatically allows a door to close once opened.
Door closers are responsible for the safe closing of doors that must always close in a controlled manner, or at least in the event of a fire. As a result, you will have a complete and safe entry/exit of your building.
Door closers are in high demand due to their functionality to secure the closing of a door: a community door, a porter’s lodge door, an office, a local or even a house, a hospital door, a shopping mall, a department store, etc. A door closer is useful or necessary in those places where you want or need to close a door.
Door Inspection
The first step of how to install a commercial door closer begins with, a check of the door (no rubbing on the floor or the frame).In case of a malfunction, it is necessary to solve the problem before installing the door closer.
If it’s a wood door, use wood screws for installation. If the door is metal, use metal screws.
Making sure the door is in good condition is an important step. Installing a commercial door closer to a damaged door can cause major problems. As a result, you will have an installation that will stop working within months and an even more damaged door that will cause further loss of money.
Template To Mark Screws
A template for marking the screws is generally supplied in the box. There can be up to four positions on the template: right or left position, always depending on the opening direction of the door, and inverted or normal position.
The normal position consists of installing the door closer to the door and the extension arm on the frame. This type of installation is ideal for gates that open inwards.
An inverted position means that the door closer is installed opposite to the normal position, the base on the frame and the arm on the door.
This installation mode is perfect for doors that open outwards. Remember to make the installation on the hinge side in both cases. In the case of not having a template, the holes are marked with the door closer.
Drill | Last Step
Now with the marked holes and a drill, a drill bit and proceed to fix the door closer by adjusting the screws.
It is advisable to hold the arm at 90º to the door. Furthermure, tighten the screws of the extension arm so that it can stay in that position.
The door closer has several screws identified with a + and a -to regulate the closing. One screw is to control the closing speed between 180º to 20º, more or less, and the other to regulate the final stroke from 20º to 0º.
If you have a door closer with a retainer, it is possible to have a third screw to regulate the strong openings. In this way, you avoid the blows to the wall and thus lengthen the life of the door closer and maintain stable the condition of the door.
Factors that Influence the Installation of a Commercial Door Closer
Door width: The width of the door and its frame definitely define the size of the door closer in order to ensure that the door closes. The width of the door determines the strength of the automatic return spring. In other words, the wider the door, the larger the spring size.
Door weight: The weight of the door is a very important factor when choosing a door closer. A door closer to a small door is not the same as a door closer to a gate because a small door closer will not be able to move a heavy door.
Push or pull: Doors, especially hinged doors, usually open in two different ways: with a push or by pulling them towards the body. All door closers are designed to fit a specific model, so it is necessary to know the exact type of opening for each door.
Door type: Doors can be made of different materials such as tempered glass, wood or aluminum. Therefore, when choosing a door closer it is necessary to check its compatibility with the material and type of door.
Get Professional Assistance
These instructions are for the simplest door closers. However, suppose you have any doubt about the correct installation, the best option is to call or consult a professional.
At Chicago Door, we offer the best door services in town! Call us Now!
Remember to have outstanding results; you must hire professionals. At Chicago Door People, we don’t offer you excellent service but the most experienced and advanced staff and equipment. Contact us now and get your free quote!